Considering you have a 2gb Eclipse, the 7" ETS core might not fill the entire opening, , I think the opening is taller than that.I personally run the Treadstone TR1045 but they also have the TR1035 which would be more fitting to your needs...
Thank you very much. It really has been. One day…just wish I had half the knowledge most of the members on here do. That too will come with time hopefully. :talon:
13 years ago. Self re built synchro trans with a twin disc clutch. Stock tcase, hd driveshaft and stock 4 bolt rear end.Another thing tho is your on an SS plate correct? I’d imagine with a new master/slave and properly functioning pedal...
Made another post specifically about my clutch disengagement issues. It got some attention. it was recommended to go back to the factory 1g slave, and that my pressure plate step height seems fine. POSTDecided to give the ol 6 puck one last...
Did you the pursue the cyclone manifold? I see you have your IM done in black which may have been in the works before talking about it last time.edit: "While you're at it", you should pull that alternator out and put in a Saturn unit.
I’ll just put that 20g right here while we wait for an intake manifold gasket, and some new injector clips.I should find some 6mm studs for the oil drain. Its always a PITA to line up the gasket and bolts.I suppose I can finally update the...
February 17thSo it was a cold one today up here in Canadaland and I thought to myself, what a beautiful day to lay on cold concrete and put a transmission in a car!Thanks to my friend Michael for coming over and helping put this thing in. I...