I'm going to pull the damaged valve then grab my large lit magnifying glass and inspect the valve seat if it's damaged I'll take it to machine shop but if it's not I'm just going to order a new valve and reseat it myself with the compounds. And...

Well I got the head off and cylinder number four exhaust valve has a chip missing out of it and tons of carbon buildup. So it's time to start cleaning carbon and all the other junk and then ordering parts to put it back together again

Thank you for the help, with that info and lifting the drivers side tire off the ground the engine and transmission could move enough to get the bracket and front timing cover off. Next I'm making the camshaft sprocket tool to hopefully get the...

Question, I have most of the components removed to get to the timing cover the engine bracket has been removed it's up on blocks and I have all the bolts loose and one removed from the cover. I still am not sure how to remove that last bracket to...

Can you remove the front timing cover and head while the engine is in the car?

Well good news the fuel pressure is good, the compression test was good except cylinder 4 it has 0 compression. So.....

Do you still have the fuel pressure regulator?

How about this...... My 99 Eclipse NT started misfireing and I cleaned the new NGK copper plugs and great it worked. It did it again and no joy the second time. Scanned it and the OB2 said misfire #4. Moved plugs around and no change. Put on a...

This is the Build Thread for AM2SS. Reply below.

Question, is there a ground for each injector? My #4 is not pulsing fuel. And I have already replaced the cam shaft position sensor, spark plugs, wires and the coil pack.